How to clean and maintain aluminum alloy sliding windows

When using aluminum alloy doors and windows, the action should be light. Do not pull hard. You need to clean the aluminum alloy sliding windows first. Keeping the door frame clean is the cleanliness of the sliding groove. Check the joints of aluminum alloy door and window frame walls. If it is loose, the frame will be deformed as a whole, so the doors and windows cannot be closed and sealed. Common window types in the door and window market can be roughly divided into three categories: aluminum alloy windows, plastic steel windows and aluminum-clad wood windows.

Compared with aluminum alloy windows and plastic steel windows, aluminum clad wood windows are much better than the other two window materials because they are mainly made of wood. In addition, the aluminum-plastic-wood window is covered with a layer of broken aluminum alloy in addition to the solid wood, so that it has good air tightness while inheriting the thermal insulation performance of the wooden window, and can effectively block sand. Therefore, it is recommended that when buying window materials, everyone should give priority to aluminum-clad wood windows.

Take a look at the material in the form of green. This material cannot have it, and the glass should be able to effectively block the damage caused by ultraviolet rays in the sun. Secondly, look at the quality of hardware. Good hardware is for windows, which directly affects the use and service life of windows. In addition to the choice of glass, the quality of the strip is usually an important factor affecting the performance of the template. The excellent rubber strip has high sealing properties, thereby optimizing the sound insulation effect of the windows.

In addition, the aluminum-clad wooden window can form a carbonized layer after the main wood is burned, and will not transmit high temperature to the other side that has not been burned, thereby causing large-area burning. Therefore, it also has good flame retardancy. On the contrary, plastic steel windows cannot be made into fireproof windows. The melting point of aluminum alloy windows is 650°C. Even if fire-resistant glass is used, it will lose its function due to the crack of the window. Therefore, in terms of performance, high-quality shape, processing, smooth tangent, angle, soft touch, and fine texture.

A good aluminum sliding window, in addition to the quality of the material and the difference in craftsmanship, the usual maintenance and cleaning are still more important

1. The sealing strip and glass glue are the key to ensure the sealing, heat preservation and waterproofing of aluminum alloy sliding windows. If they fall off, they should be repaired and replaced in time.

To

2. When cleaning aluminum alloy sliding windows, never step on the aluminum frame or pull the frame for support. Usually the dust on the glass can be wiped with alcohol.

To

3. After a rainy day, the raindrops on the glass and door and window frames should be wiped off in time, paying special attention to the accumulation of water in the chute. If the chute is used for a long time, the friction will increase, and a little engine oil or a layer of fire wax oil can be added.

To

4. Frequently check the joints between the aluminum alloy sliding window frame and the wall. If it becomes loose over time, it will easily deform the frame as a whole, making the doors and windows unable to be closed and sealed. Therefore, if the screws of the joint are loose, they should be tightened immediately. If the screw feet are loose, apply a small amount of cement to seal with epoxy super glue.

To

5. In the use process of sliding aluminum alloy sliding window, you should push and pull gently, and the sliding should go with the flow; do not force it when you find it is difficult, you should remove the fault first. Dust accumulation and deformation are the main reasons for the difficulty of sliding aluminum sliding windows. Keep the door frame clean, especially the sliding groove. A vacuum cleaner can be used to remove the dust accumulation in the groove and the door seal strip.

How to clean aluminum storm windows

How to clean aluminum window tracks

How to clean aluminum window frames

Cleaning aluminium window frames with vinegar

How to clean powder coated aluminium window frames

How to clean bronze aluminum window frames